Aligning: | Non-Aligning Bearing |
---|---|
Separated: | Separated |
Feature: | High Temperature |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Pillow block bearing is a bearing unit that combines a rolling bearing and bearing seat. Most of the outer spherical bearings are made of a spherical outer diameter and are installed together with an imported bearing seat with a spherical inner hole. The structure is diverse, and the versatility and interchangeability are good.
At the same time, this type of bearing also has a certain degree of alignment in design, is easy to install, and has a dual-structure sealing device that can work in harsh environments. The bearing seat is generally formed by casting. Commonly used seats are vertical seat (P), square seat (F), boss square seat (FS), boss round seat (FC), diamond seat (FL), ring seat (C), and slider seat (T) and so on.
Unit No. | Dimensions (mm/inch) | Bolt Size mm inch | Bearing No. | Housing No. | Weight (kg) | |||||||||||
d | h | a | e | b | s1 | s2 | g | w | t | B | n | |||||
UCP201 | 12 | 30.2 | 124 | 94 | 32 | 13 | 19 | 14 | 57 | 44.5 | 31 | 12.7 | M10 | UC201 | P203 | 0.66 |
UCP201-8 | 1/2 | 1-3/16 | 5 | 3-3/4 | 1-1/2 | 1/2 | 3/4 | 9/16 | 2-7/16 | 1-3/4 | 1.2205 | 0.5 | 3/8 | UC201-8 | 0.66 | |
UCP202 | 15 | 30.2 | 124 | 94 | 32 | 13 | 19 | 14 | 57 | 44.5 | 31 | 12.7 | M10 | UC202 | P203 | 0.66 |
UCP202-9 | 9/16 | 1-3/16 | 5 | 3-3/4 | 1-1/2 | 1/2 | 3/4 | 9/16 | 2-7/16 | 1-3/4 | 1.2205 | 0.5 | 3/8 | UC202-9 | 0.66 | |
UCP202-10 | 5/8 | UC202-10 | 0.66 | |||||||||||||
UCP203 | 17 | 30.2 | 124 | 94 | 32 | 13 | 19 | 14 | 57 | 44.5 | 31 | 12.7 | M10 | UC203 | P203 | 0.66 |
UCP203-11 | 11/16 | 1-3/16 | 5 | 3-3/4 | 1-1/2 | 1/2 | 3/4 | 9/16 | 2-7/16 | 1-3/4 | 1.2205 | 0.5 | 3/8 | UC203-11 | 0.66 | |
UCP204 | 20 | 33.3 | 127 | 94 | 32 | 13 | 19 | 14 | 57 | 44.5 | 31 | 12.7 | M10 | UC204 | P204 | 0.70 |
UCP204-12 | 3/4 | 1-5/16 | 5 | 3-3/4 | 1-1/2 | 1/2 | 3/4 | 9/16 | 2-7/16 | 1-3/4 | 1.2205 | 0.5 | 3/8 | UC204-12 | 0.70 | |
UCP205 | 25 | 36.5 | 140 | 105 | 38 | 13 | 19 | 15 | 69.5 | 48 | 34.1 | 14.3 | M10 | UC205 | P205 | 0.76 |
UCP205-13 | 13/16 | 1-7/16 | 5-1/2 | 4-1/8 | 1-1/2 | 1/2 | 3/4 | 19/32 | 2-25/32 | 1-57/64 | 1.3425 | 0.563 | 3/8 | UC205-13 | 0.85 | |
UCP205-14 | 7/8 | UC205-14 | 0.83 | |||||||||||||
UCP205-15 | 15/16 | UC205-15 | 0.82 | |||||||||||||
UCP205-16 | 1 | UC205-16 | 0.81 | |||||||||||||
UCP206 | 30 | 42.9 | 160 | 121 | 44 | 17 | 20 | 17 | 84 | 53 | 38.1 | 15.9 | M14 | UC206 | P206 | 1.24 |
UCP206-17 | 1-1/16 | 1-11/16 | 6-19/64 | 4-3/4 | 1-47/64 | 43/64 | 25/32 | 21/32 | 3-5/16 | 2-5/64 | 1.5 | 0.626 | 1/2 | UC206-17 | 1.27 | |
UCP206-18 | 1-1/8 | UC206-18 | 1.26 | |||||||||||||
UCP206-19 | 1-3/16 | UC206-19 | 1.24 | |||||||||||||
UCP206-20 | 1-1/4 | UC206-20 | 1.23 | |||||||||||||
UCP207 | 35 | 47.6 | 167 | 127 | 48 | 17 | 20 | 18 | 93 | 59.5 | 42.9 | 17.5 | M14 | UC207 | P207 | 1.58 |
UCP207-20 | 1-1/4 | 1-7/8 | 6-9/16 | 5 | 1-7/8 | 43/64 | 25/32 | 45/64 | 3-21/32 | 2-11/32 | 1.689 | 0.689 | 1/2 | UC207-20 | 1.64 | |
UCP207-21 | 1-5/16 | UC207-21 | 1.61 | |||||||||||||
UCP207-22 | 1-3/8 | UC207-22 | 1.58 | |||||||||||||
UCP207-23 | 1-7/16 | UC207-23 | 1.55 | |||||||||||||
UCP208 | 40 | 49.2 | 181 | 136 | 50 | 17 | 20 | 18 | 98 | 69 | 49.2 | 19 | M14 | UC208 | P208 | 1.89 |
UCP208-24 | 1-1/2 | 1-15/16 | 7-1/4 | 5-13/32 | 2-7/8 | 43/64 | 25/32 | 45/64 | 3-15/16 | 2-23/32 | 1.937 | 0.748 | 1/2 | UC208-24 | 1.93 | |
UCP208-25 | 1-9/16 | UC208-25 | 1.90 | |||||||||||||
UCP209 | 45 | 54 | 190 | 146 | 54 | 17 | 20 | 20 | 106 | 69 | 49.2 | 19 | M14 | UC209 | P209 | 2.14 |
UCP209-26 | 1-5/8 | 2-1/8 | 7-15/32 | 5-3/4 | 2-1/8 | 43/64 | 25/32 | 25/32 | 4-11/64 | 2-23/32 | 1.937 | 0.748 | 1/2 | UC209-26 | 2.24 | |
UCP209-27 | 1-11/16 | UC209-27 | 2.20 | |||||||||||||
UCP209-28 | 1-3/4 | UC209-28 | 2.14 | |||||||||||||
UCP210 | 50 | 57.2 | 203 | 159 | 60 | 20 | 23 | 21 | 113 | 74.5 | 51.6 | 19 | M16 | UC210 | P210 | 2.66 |
UCP210-29 | 1-13/16 | 2-1/4 | 8-1/8 | 6-1/4 | 2-3/8 | 25/32 | 29/32 | 53/64 | 4-29/64 | 2-15/16 | 2.0315 | 0.748 | 5/8 | UC210-29 | 2.78 | |
UCP210-30 | 1-7/8 | UC210-30 | 2.73 | |||||||||||||
UCP210-31 | 1-15/16 | UC210-31 | 2.68 | |||||||||||||
UCP210-32 | 2 | UC210-32 | 2.64 | |||||||||||||
UCP211 | 55 | 63.5 | 218 | 171 | 57 | 20 | 23 | 23 | 125 | 76 | 55.6 | 22.2 | M16 | UC211 | P211 | 3.31 |
UCP211-32 | 2 | 2-1/2 | 8-5/8 | 6-47/64 | 2-3/8 | 25/32 | 29/32 | 29/32 | 4-59/64 | 3 | 2.189 | 0.874 | 5/8 | UC211-32 | 3.46 | |
UCP211-33 | 2-1/16 | UC211-33 | 3.40 | |||||||||||||
UCP211-34 | 2-1/8 | UC211-34 | 3.35 | |||||||||||||
UCP211-35 | 2-3/16 | UC211-35 | 3.29 | |||||||||||||
UCP212 | 60 | 69.8 | 239 | 184 | 70 | 20 | 23 | 25 | 138 | 89 | 65.1 | 25.4 | M16 | UC212 | P212 | 4.90 |
UCP212-36 | 2-1/4 | 2-3/4 | 9-1/2 | 7-1/4 | 2-3/4 | 25/32 | 29/32 | 63/64 | 5-7/16 | 3-1/2 | 2.563 | 1 | 5/8 | UC212-36 | 5.03 | |
UCP212-37 | 2-5/16 | UC212-37 | 4.95 | |||||||||||||
UCP212-38 | 2-3/8 | UC212-38 | 4.88 | |||||||||||||
UCP212-39 | 2-7/16 | UC212-39 | 4.81 | |||||||||||||
UCP213 | 65 | 76.2 | 264 | 203 | 70 | 25 | 28 | 27 | 150 | 89 | 65.1 | 25.4 | M20 | UC213 | P213 | 5.15 |
UCP213-40 | 2-1/2 | 3 | 10-7/16 | 8 | 2-3/4 | 63/64 | 1-3/32 | 1-1/16 | 5-29/32 | 3-1/2 | 2.563 | 1 | 3/4 | UC213-40 | 5.24 | |
UCP213-41 | 2-9/16 | UC213-41 | 5.15 | |||||||||||||
UCP214 | 70 | 79.4 | 266 | 210 | 72 | 25 | 28 | 27 | 156 | - | 74.6 | 30.2 | M20 | UC214 | P214 | 6.20 |
UCP214-42 | 2-5/8 | 3-1/8 | 10-15/32 | 8-17/64 | 2-27/32 | 63/64 | 1-3/32 | 1-1/16 | 6-9/64 | - | 2.937 | 1.189 | 3/4 | UC214-42 | 6.41 | |
UCP214-43 | 2-11/16 | UC214-43 | 6.31 | |||||||||||||
UCP214-44 | 2-3/4 | UC214-44 | 6.21 | |||||||||||||
UCP215 | 75 | 82.6 | 275 | 217 | 74 | 25 | 28 | 28 | 162 | - | 77.8 | 33.3 | M20 | UC215 | P215 | 7.16 |
UCP215-45 | 2-13/16 | 3-1/4 | 10-53/64 | 8-35/64 | 2-29/32 | 63/64 | 1-3/32 | 1-3/32 | 6-3/8 | - | 3.063 | 1.311 | 3/4 | UC215-45 | 7.41 | |
UCP215-46 | 2-7/8 | UC215-46 | 7.30 | |||||||||||||
UCP215-47 | 2-15/16 | UC215-47 | 7.19 | |||||||||||||
UCP215-48 | 3 | UC215-48 | 7.07 | |||||||||||||
UCP216 | 80 | 88.9 | 290 | 232 | 78 | 25 | 28 | 30 | 174 | - | 82.6 | 33.3 | M20 | UC216 | P216 | 8.10 |
UCP216-49 | 3-1/16 | 3-1/2 | 11-1/2 | 9-1/8 | 3-1/16 | 63/64 | 1-3/32 | 1-3/16 | 6-27/32 | - | 3.252 | 1.311 | 3/4 | UC216-49 | 8.28 | |
UCP216-50 | 3-1/8 | UC21S-50 | 8.15 | |||||||||||||
UCP216-51 | 3-3/16 | UC216-51 | 8.02 | |||||||||||||
UCP217 | 85 | 95.2 | 310 | 247 | 83 | 25 | 28 | 32 | 185 | - | 85.7 | 34.1 | M20 | UC217 | P217 | 9.81 |
UCP217-52 | 3-1/4 | 3-3/4 | 12-13/64 | 9-23/32 | 3-17/64 | 63/64 | 1-3/32 | 1-1/4 | 7-9/32 | - | 3.374 | 1.343 | 3/4 | UC217-52 | 8.28 | |
UCP217-53 | 3-5/16 | UC217-53 | 8.15 | |||||||||||||
UCP217-55 | 3-7/16 | UC217-55 | 8.02 | |||||||||||||
UCP218 | 90 | 101.6 | 327 | 262 | 88 | 27 | 30 | 33 | 198 | - | 96 | 39.7 | M22 | UC218 | P218 | 11.96 |
UCP218-56 | 3-1/2 | 101.6 4 | 12-7/8 | 10-5/16 | 3-15/32 | 1-1/16 | 1-3/16 | 1-19/64 | 7-51/64 | - | 3.7795 | 1.563 | 7/8 | UC218-56 | 12.07 |
Features | Application Field |
|
|
More Choices
Raw Material | ||
The selection of raw materials is a fundamental step in the production of high-quality bearings. The development and choice of high purity steel is crucial in order to achieve greater durability than required by the ISO standards referred to.
This type of steel combined with a heat treatment, is an excellent solution for various applications. |
||
Quality Control | ||
Granville as a manufacturer of high quality products, guarantees compliance with the highest standards relative to the use of the best steel quality in the production process, the highest standards in the design of contact surfaces, as well as the most efficient packing and lubrication of parts. From material coming, quality control through all processes. Except for interal test, goods to third party inspection if required. After the center of inspection and experiment is founded, effective methods of inspecting all kinds of raw materials are mastered and then the reliability of bearings is ensured. One of our main objectives is the continued improvement in the quality of our products and processes, in pursuit of which we obtained ISO certification 9001:2008 and TS16949.
Advantage Manufacturing Processes and Quality Control
|
||
Packing Method | Testing Application | |
Granville Industrial Company, which was founded in Britain and involved in various auto parts, is one of the important manufacturers and suppliers worldwide. We provide a strong full range of products, including:
Suppliers with verified business licenses